Home > Reviews > Clothes & Gear Reviews

Kask Elemento Helmet Review: Is 3D-Printed Padding worth the $400 Price Tag?

KASK Elemento Helmet jordan Villella close
6 Comments
Support us! Bikerumor may earn a small commission from affiliate links in this article. Learn More

We’ve seen the world’s best wearing the Kask Elemento this season. That includes everyone from mountain bike champions like Tom Pidcock and Pauline Ferrand-Prevot, to the entire INEOS Grenadiers squad on the road. The helmet bears all the style and pedigree of a new do-it-all lid for the masses (that can afford it).

KASK Elemento Helmet strap
All Photos: Jordan Villella/BikeRumor

Kask Elemento helmet – What is it?

For those new to the Elemento, you can check out our tech piece here. But what sets the Elemento apart from the crowd (besides the slippery new shape) is a new Fluid Carbon 12 composite technopolymer and 3D-printed padding.

KASK Elemento Helmet 3d printed padding

The padding is super lightweight, ventilated, and easily conforms to different head shapes. The material of the Fluid Carbon 12 shell is said to absorb the impact and then can distribute that force more evenly across the helmet. Kask also claims that the Fluid Carbon allows for less EPS foam inside the helmet which improves ventilation while making for a smaller helmet overall for increased aerodynamics. Further, it may increase crash safety by providing a low friction surface between the helmet and whatever it hits (like the road).

KASK Elemento Helmet side

The outer shell wraps all they way around the helmet’s underside, which gives the internal foam protection against caustic sweat and dents.

KASK Elemento Helmet jordan Villella smile head on

How’s the fit of the Kask Elemento?

I wear a size medium in the Kask Protone (and most helmets) and the Elemento in a size medium (52-58cm) fit like a glove, er..helmet. The updated Kask Octofit+ works very well. With thick or thin gloves, the adjustment dial is easy to use on the fly. The retention system cradles the base of the skull and has a sliding (slightly indexed) height adjustment.

KASK Elemento Helmet retention

The height adjustment for the Octofit+ has a slight index but doesn’t lock in place like some helmets. This floating height adjustment requires a dial-in before every ride, which is good if you wear a helmet liner or thick cap for winter. For those who like the “set it and forget it” style fit, the Elemento requires some pre-ride fiddling.

KASK Elemento Helmet
I’m disappointed to see Kask move away from its iconic leather strap, but the nylon performance is just as good and lighter. Also note the ear cradles are non-adjustable.

The new 3D padding and generous foam padding give the Elemento a great fit out of the box. The 3D padding on the top of the head has a slightly different feel from traditional foam but is very open to airflow in comparison.

KASK Elemento Helmet carbon

Tech Specs KASK Elemento

  • Sizes: SM (50 – 56), MED (52 – 58)*, LRG (59 – 62) *tested
  • Weight: 260 grams (size M)
  • Colors: Classic Black or White, New metallic finishes: Beetle Green, Oxford Blue (pictured), Red, and Silver.
  • Price: USD $400, EUR 375€, GBP £335.
KASK Elemento Helmet jordan Villella close

Ride Impressions

I used the Elemento nearly exclusively since its launch. I’ve taken it through XC, gravel, road, and cyclocross races.

Nearly all of my ride impressions with the Kask Elemento have been positive. The way the Elemento can go from a crit to a cross-country mountain bike race is fantastic. It’s a do-it-all helmet; there is no questioning that.

In the heat, the Elemento is breezy; the air flows right through. The ports in the front of the helmet are set up right on the money for cooling and airflow. The helmet’s light weight adds to this sensation, giving the Elemento an excellent on-bike feel.

After I hit the four-month riding mark, I noticed the front padding (non-3D) lost most of its sweat retention and padding. Kask offers replacement padding for the Elemento for an extra $30. The 3D padding kept its shape perfectly but started to peel away slightly on the narrow sections of the top.

KASK Elemento Helmet front close

The ports could be better for all sunglasses, though, and I found that even my KOO glasses had difficulty staying in place when docked. The glasses fit okay, but the lack of a gripper or rubber grommet on the vent allows them to slide, and a look down could cost you your shades.

KASK Elemento Helmet front

Padding and sunglass holding aside, my Elemento took a beating this season—lots of travel and baking heat. Then, muddy cyclocross races with a shouldered bike knocking into my head when I ran. With all this, the Elemento still looks nearly as good as the day I received it. The shell shows no signs of denting, and the shine returns quickly with some polish.

Final Thoughts – Kask Elemento

The Kask Elemento is an excellent performance helmet, but the $400 price tag is a tough pill to swallow. Yes, there are some padding issues, but those are a quick fix with glue and a new pad kit. But should you have to replace the pads on a helmet that quickly? It’s up to the end user and what they deem the most important. The helmet’s overall race performance and comfort are amongst my top favorites.

I recommend the Kask Elemento for riders looking for a top-of-the-line helmet for all their race efforts. If you have an aero road helmet, cross country helmet, gravel helmet (whatever that is), and trade those for one Elemento, the price should be worth it.

For more information and to purchase the Kask Elemento, check out Kask.com

Subscribe
Notify of
guest

This site uses Akismet to reduce spam. Learn how your comment data is processed.

6 Comments
Oldest
Newest Most Voted
Inline Feedbacks
View all comments
Deputy Dawg
Deputy Dawg
20 days ago

All Kask’s have a fiddly height adjustment. I love every other aspect of my Caipi, so I ended up setting it, and locking it in place with a drop of superglue two years ago. Still going strong!

Ingram
Ingram
20 days ago

Looks like it’s hard to thoroughly clean the hollow pads. Do you need a ultrasonic cleaner before buying this helmet?

SteveT
SteveT
20 days ago

Dentists gotta wear something.

Al_nyc
Al_nyc
19 days ago

Sounds like a pretty mediocre helmet for a ridiculous price. You are paying a whole lot more for 3D printed padding that doesn’t make the helmet safer or more comfortable and it seems has some premature wear issues. It looks like you pay more and get less.

I recently saw and ad for a $300 helmet where the material that absorbs the impact is 3D printed and has a longer lifespan, at least 5 years. That looks more interesting and if it works as advertised might be worth the premium price.

Evan
Evan
19 days ago

“Costic”? Come on now…

Stefan
Stefan
12 days ago

Same front air inlet guide as on the GIRO Aries.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.

Subscribe Now

Sign up to receive BikeRumor content direct to your inbox.